VEGA PLICSCOM - Manual (Page 20)

20
5 Setup - Sensors up to software 3.99
PLICSCOM •
36433-EN-130228
In this menu item, the PIN is activated/deactivated permanently.
Entering a 4-digit PIN protects the sensor data against unauthorized
access and unintentional modifications. If the PIN is activated perma-
nently, it can be deactivated temporarily (i.e. for approx. 60 min.) in
any menu item. The instrument is delivered with the PIN set to 0000.
PIN
Disable permanently?
Only the following functions are permitted with activated PIN:
•
Select menu items and show data
•
Read data from the sensor into the display and adjustment mod-
ule.
In this menu item the most important sensor information can be
displayed:
•
Instrument type
•
Serial number: 8-digit number, e.g. 12345678
Instrument type
Serial number
12345678
•
Date of manufacture: Date of the factory calibration
•
Software version: Edition of the sensor software
Calibration date
Software version
•
Date of last change using PC: Date of the last change of sensor
parameters via PC
Last change using PC
•
Sensor details, e.g. approval, process fitting, seal, measuring cell,
measuring range, electronics, housing, cable entry, plug, cable
length etc.
Sensor characteristics
Display now?
5.2 Adjustment menu 4 … 20 mA/HART
In the menu item "Display" you can define how the measured value
should be presented on the display.
Service/PIN
Info/Info
Display/Display