VEGA VEGAMET 391 With SIL qualification - Manual (Page 44)

44
10 Maintenance and fault rectification
VEGAMET 391 • With SIL qualification
38704-EN-130228
Error code Cause Rectification
E117 A monitored pump
signals failure
– Check the faulty pump. For ac-
knowledgement, carry out the reset
"Failure relay 1 … 4" or switch the
instrument OFF and ON again
E125 Temperature outside
the permissible range
– Operate instrument at permissible
ambient temperature (see technical
data)
Depending on the reason for the fault and the measures taken, the
steps described in chapter "Set up" may have to be carried out again.
10.3 Instrument repair
If a repair is necessary, please proceed as follows:
You can download a return form (23 KB) from our Internet homepage
www.vega.com under: "Downloads - Forms and certificates - Repair
form".
By doing this you help us carry out the repair quickly and without hav-
ing to call back for needed information.
•
Print and fill out one form per instrument
•
Clean the instrument and pack it damage-proof
•
Attach the completed form and, if need be, also a safety data
sheet outside on the packaging
•
Please ask the agency serving you for the address of your return
shipment. You can find the respective contact data on our website
www.vega.com under: "Company - VEGA worldwide"
Reaction after fault recti-
fication