VEGA VEGAMET 515 - Manual (Page 35)

VEGAMET 515 35
Parameter adjustment
7.3 Adjustment with linked measure-
ments
Linked measurements are possible with
VEGAMET 515. For this reason, two sensors
are connected which carry out one measure-
ment each (TAG1 and TAG2). VEGAMET 515
calculates from the two sensor values a third
value, e.g. a gauge difference (TAG3). When
adjusting linked measurements, factors other
than those with single measurement will pos-
sibly have to be taken into account.
For all linked measurements, it is important to
enter the sensor characteristics values be-
fore the adjustment. To do this, move to the
menu item under "Sensor characteristics“.
Confi-
gura-
tion
Config
inputs
Input
no. 1
Input
from
local
Met
Chan-
nel no.
S1
Sensor
charac-
teris-
tics
Min.
meas.
range
XXX
Max.
meas.
range
XXX
Min.
sensor
value
XXXX
Max.
sensor
value
XXXX
TAG -
No. 1
%
xx,x
Param.
TAG-
No. 1
MET02
MET03
MET04
….
Input
undef-
ined
Input1
Input2
Input3
Input
no. 2
like input 1
TAG -
No. 2
%
xx,x
Param.
TAG-
No. 2
TAG -
No. 3
%
xx,x
Param.
TAG-
No. 3
Enter here the characteristics
values. The data are stated in
the test certificate of your
sensor.