VEGA VEGAMET 515 - Manual (Page 14)

14 VEGAMET 515
ESC
Adjustment
4.2 Adjustment system
Indicating and adjustment module
Adjustment structure
The adjustment is made via 6 keys in con-
junction with the text display. The jump from
the measured value display to the lower
menu item is made with [OK]. Use [–>] or
[<–] to change within this menu level from
one menu item to the other. A branching point
is indicated by the symbol ▼ and enables
with [OK] a jump to the lower menu item.
Parameters are indicated when the symbol ▼
is missing. The value of the parameters can
be modified with [+] or [–] or chosen out of a
list. The modified value can be saved with
[OK]. To interrupt a setting (without saving
the modification), you have to push [ESC].
The reset to the next higher menu item is
made with [ESC]. 15 minutes after pushing
the key for the last time, an automatic reset to
the measured value display is triggered. The
reset to the next higher menu level with [ESC]
is possible from each menu item , even if no
connection is shown in the menu schematics.
If you are in the utmost right menu item of a
menu row and push the [–>] key, you will
immediately reach the utmost left menu item
of this row. You also reach immediately the
utmost right menu item from the left one, if
you push the [<–] key.
The connections (shown with a broken line)
are not shown in the menu schematics in
order to provide a better overview.
Add’l
func-
tions
Pass-
word
on
Lang-
uage
Eng-
lish
Reset
VEGA-
MET Ser-
vice
ESC ESC ESC ESC
Volt
out-
put 1
prop.
to
Per-
cent
Unit
0,0%
Volt
output
0/10V
Failure
mode
0V
Volt
limita-
tion
on
Depending on the menu item, change
value or choose out of a list
Choose menu item
Depending on the menu item, save the
set value or change to the lower menu
Branching point, i.e. jump to the next
lower menu with [OK]
Depending on the menu item, interrupt
adjustment or change to the next higher
menu
Indication of
- measured value
- menu item
- parameter
%
100
+ -
OK ESC
Info
ESC
Edit
lin.
curve