VTech IS7121_-2-22 Manual - Manual (Page 86)

81
Answering system operation
Message playback
On the telephone base, when playback begins, the total number of old or new
messages is announced, and the message window displays the message number
currently playing.
On the handset, if you have both new and old messages, you can play either new or
old messages. The caller ID information displays on the handset screen when you
play messages and you can call back the caller.
Before each message, you hear the day and time of the recording. If the date and time
are not set, you hear, “Time and date not set,” before playback.
After the last message, you hear, “End of messages.” and the handset displays
End of messages.
If the recording time left on the answering system is less than three minutes, you hear,
“Less than three minutes to record.”
If there are no recorded messages, the screen shows
You have: No messages and
you hear, “You have no messages.”
To play messages at the telephone base:
Press /PLAY when the phone is not in use.
Options during playback:
Press VOL- or VOL+ to adjust the message playback volume.
Press /SKIP to skip to the next message.
Press /REPEAT to repeat the message. Press /REPEAT twice to listen to the
previous message.
Press
X/DELETE to delete the playing message.
Press /STOP to stop the playback.
•
•
•
•
•
•