Remote access code, Message alert tone, Remote access code message alert tone – VTech IS7121_-2-22 Manual User Manual
Page 81: Answering system settings
76
Answering system settings
Remote access code
A two-digit security code is required to access the answering
system remotely from any touch-tone telephone. The preset code
is
19. You can set the code from 00 to 99.
Press
MENU
when the phone is not in use.
Press q or p
to scroll to AnsweringSys, then press
SELECT
.
Press q or p
to scroll to Ans sys setup, then press
SELECT
.
Press q or p
to scroll to Remote code, then press
SELECT
.
Use the dialing keys to enter a two-digit number.
Press q or p to move the cursor to the left or right.
Press
DELETE or
BACKSP
to erase a digit.
Press and hold
DELETE to erase all digits.
Press
SAVE
to save and you hear a confirmation tone.
Message alert tone
When the message alert tone is set to on, and there is at least
one new message, the telephone base beeps every 10 seconds.
There is no audible alert at the handset. The message alert tone
is preset to off.
Press
MENU
when the phone is not in use.
Press q or p
to scroll to AnsweringSys, then press
SELECT
.
Press q or p
to scroll to Ans sys setup, then press
SELECT
.
Press q or p
to scroll to Msg alert tone, then press
SELECT
.
Press q or p
to choose On or Off.
Press
SET
to save and you hear a confirmation tone.
The answering system must be turned on for the message alert
tone to be functional.
1.
2.
3.
4.
5.
•
•
•
6.
1.
2.
3.
4.
5.
6.
ANS SYS SEYUP
Call screening
# of rings
Remote code
Msg alert tone
Recording time
BACK
SELECT
Remote code
REMOTE CODE
19
BACKSP
SAVE
ANSWERING SYS
Announcement
Delete all old
Record memo
Answer ON/OFF
Ans sys setup
BACK
SELECT
Ans sys setup
ANS SYS SEYUP
Call screening
# of rings
Remote code
Msg alert tone
Recording time
BACK
SELECT
Msg alert tone
MSG ALERT TONE
On
Off
BACK
SET