VTech IS7121_-2-22 Manual - Manual (Page 62)

57
Multiple handset use
Answer a PTT call
You can respond to a PTT call whenever the speakerphone light is off.
When your handset receives a PTT call, the handset beeps and displays
Press and hold [PTT] to talk.
When the other party is speaking, your speakerphone light is on, and your handset
displays PTT From HANDSET X To handset: Y (X represents the originating
handset and Y represents the destination handset; a maximum of four handset
numbers appear).
When your speakerphone light is off and the handset displays
Press and hold
[PTT] to talk, press and hold PUSH TO TALK on your handset. When you hear a
chirp, speak towards the handset.
While you are speaking, your handset displays PTT To HANDSET X
( X represents the handset numbers of one or more destination handsets; a
maximum of four handset numbers appear).
Your voice is broadcast to all destination handsets.
After speaking, release PUSH TO TALK. Your handset will beep. After the beep, if
your speakerphone light is off, you can press and hold PUSH TO TALK to speak
again or the destination handset can respond.
Change a one-to-one PTT to intercom call
You can convert a one-to-one PTT session to an intercom call.
When your handset displays Press and hold [PTT] to talk,
press INTCOM . Your handset displays Switch to Intercom?
Press SELECT to confirm.
If you have two handsets, your handset displays Calling
other handset. The destination handset temporarily displays
Push to talk Ended and then Other handset is calling.
If you have three or more handsets, your handset displays
Calling HANDSET Y (Y represents the destination handset).
The destination handset temporarily displays Push to talk
Ended and then HANDSET X is calling (X represents the
originating handset).
On the destination handset, press or to answer the
intercom call. Both handsets now display Intercom.
To end the intercom call, press OFF or place the handset
in the telephone base or charger. Both handsets display
Intercom ended.
1.
2.
3.
•
•
1.
•
•
2.
3.
Press and hold
[PTT] to talk
END INTCOM
Switch to
Intercom?
BACK SELECT