VTech IS7121_-2-22 Manual - Manual (Page 79)

74
Answering system settings
Answer on/off
If you turn the answering system on, it answers calls and records messages.
If your answering system is turned off and you change any of its settings, the
answering system automatically turns on and the handset displays Calls will
be answered.
The answering system must be turned on to answer and record messages. When the
answering system is turned on, the /ANS ON/OFF light on the telephone base turns
on and ANS ON displays on the handset.
To turn on or off at the telephone base:
Press /ANS ON/OFF to turn the answering system on or off.
When the answering system is turned on, it announces, “Calls
will be answered.” When the answering system is turned off, it
announces, “Calls will not be answered.”
To turn on or off at the handset:
Press MENU when the phone is not in use.
Press q or p to scroll to AnsweringSys, then
press SELECT .
Press q or p to scroll to Answer ON/OFF, then
press SELECT .
Press q or p to choose On or Off, then press SET to
confirm. You hear a confirmation tone.
If there is no memory capacity left on your answering system
when you turn it on with the telephone base, Calls will not
be answered. Memory full displays on the handset. The
answering system cannot be turned on and it announces,
“Memory is full. Calls will not be answered.”
If the remaining recording time is less than three minutes
when you turn the answering system on, the telephone
announces, “Calls will be answered. Less than three minutes
to record.” and the handset displays Rec mem low.
•
1.
2.
3.
4.
•
•
ANSWERING SYS
Announcement
Delete all old
Record memo
Answer ON/OFF
Ans sys setup
BACK SELECT
Answer ON/OFF
ANSWER ON/OFF
On
Off
BACK SET