VTech IS7121_-2-22 Manual - Manual (Page 11)

Getting started
6
Installation options
Your telephone base is ready for tabletop use. If you want to mount your telephone
on a wall, use the provided wall mount bracket to connect with a standard dual-
stud telephone wall mounting plate. If you do not have this mounting plate, you can
purchase one from many hardware or consumer electronics retailers. You may need a
professional to install the mounting plate.
Tabletop to wall mount installation
If you have already installed the telephone for tabletop use, unplug the telephone
line cord from the telephone wall jack, and unplug the telephone base power
adapter from the wall outlet. Remove the telephone line cord and the power adapter
cord from the grooves.
1.
Route the telephone line cord through the rectangular hole on the wall mount
bracket. Position the lower portion grooves on the telephone base to the lower
portion tabs (marked B) on the wall mount bracket. Make sure the upper portion
grooves of the telephone base are above the upper portion tabs (marked A) on the
wall mount bracket. Push the telephone base down until it clicks securely in place.
2.