VTech IS7121_-2-22 Manual - Manual (Page 46)

41
Answer a chime
When /DOORBELL is pressed, you hear a chime. The doorbell
automatically captures a photo of the visitor.
Press SPEAK to answer.
Only one handset can answer the chime and start a video
streaming session.
If you have more than two handsets, only the first two
registered handsets display the photo.
The video streaming ends after 30 seconds.
Press
OFF to silence the chime.
Only one doorbell can perform video streaming session at
a time. If other doorbell is pressed, you hear a chime, but
no handsets can answer.
Start a video streaming session
Press /VIEW or VIEW when /DOORBELL is pressed and
you hear a chime on the handset.
If you do not press the flashing SPEAK during the video
streaming, the session ends in 2 minutes.
-OR-
Press /VIEW when the handset is not in use.
If you have more than one doorbell, press q or p to scroll to
the desired doorbell and then press SELECT .
-OR-
Press /VIEW during a call. The call is put on hold and other
system handsets display Line on hold. You hear a beep every
10 seconds.
If you do not connect the doorbell to AC power, you cannot
start a video streaming session with a handset. The handset
displays To view video from doorbell, please use AC
power mode. and you hear an error tone.
If you do not press the flashing
SPEAK during the video
streaming, the session ends in 2 minutes.
•
•
•
•
•
•
•
•
•
•
•
•
•
Doorbell operation
Doorbell 1
is ringing
SPEAK VIEW
DOORBELL
DOORBELL 1
DOORBELL 2
BACK SELECT