Veris Industries TB SERIES Install - Manual (Page 2)

Z205464-0F Page 2 of 2 ©2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 09134
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
Installation Guide
Temperature
TB/TRA Series
TM
2.9"
(74 mm)
4"
(102 mm)
strap fits pipe diameters up to 12” 2"
(51 mm)
0.3"
(6 mm)
TRA Model TB Model Dimensions
Installation TB:
1. Clamp the sensor around the pipe to be monitored. Make sure the copper sensing plate is in contact with the pipe surface.
2. Wire the sensor to the controller as shown.
Red
Black
Thermistor
RTD
Thermistor
RTD
Orange
Orange
TRA:
1. Set the stainless steel sensing probe in contact with the area to be monitored. No mounting necessary.
2. Wire the sensor to the controller as shown.