Veris Industries 770 Manual - Manual (Page 2)

770 Features and Push Buttons CARBON MONOXIDE - SINGLE GAS MONITOR
Product Description
The 770 CO Single Gas Monitor is a state-of- the-art
Carbon Monoxide Instrument designed to measure Carbon
Monoxide in ambient air and to perform a carbon monoxide
build up test . It has a measurement range of 0 to 999 ppm
(parts per million) and displays the readings in 1ppm incre-
ments. The unit features a personal audible and visual
alarm, which is factory set at 30ppm CO but can be
changed in the field to keep current with government
legislation. Other features include: maximum reading hold,
elapsed time and manual zero. The audible alarm may be
switched on and off as required. Battery changing is made
easy by use of a simple slide off battery compartment
cover.
The detector uses an advanced electrochemical sensor that
measures Carbon Monoxide and should not be used for any
other purpose.
Note: This instrument meets the requirements of
BS 7967
Calibration is required every 12 months
Red Warning
LED
SEL Push
Button
Green Power
LED
LCD Display
ON/OFF
Push Button
Mode Push
Button
Sensor opening
on back of case
Battery compart-
ment access on
back housing