Veris Industries H8920-3 Install - Manual (Page 6)

Z203538-0F PAGE 6 ©2011 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 07111
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
TM
H8920-3 INSTALLATION GUIDE
NETWORK VARIABLE DETAILS
Name Type Range Description
nv1 nvoEgyWH 0-1e38kWH Total Accumulated Energy
nv2 nvoPower 0-1e38kW Power
nv3 nvoVAR 0-1e38kW Reactive Power
nv4 nvoVA 0-1e38kW Apparent Power
nv5 nvoPF 0-1 Power Factor
nv6 nvoLLVolts 0-1e38V Voltage, Line to Line
nv7 nvoLNVolts 0-1e38V Voltage, Line to Neutral
nv8 nvoAmps 0-1e38A Amps
nv9 nvoAPower 0-1e38kW Power, Phase A
nv10 nvoBPower 0-1e38kW Power, Phase B
nv11 nvoCPower 0-1e38kW Power, Phase C
nv12 nvoAPF 0-1 Power Factor, Phase A
nv13 nvoBPF 0-1 Power Factor, Phase B
nv14 nvoCPF 0-1 Power Factor, Phase C
nv15 nvoABVolts 0-1e38V Voltage, Phase A to Phase B
nv16 nvoBCVolts 0-1e38V Voltage, Phase B to Phase C
nv17 nvoACVolts 0-1e38V Voltage, Phase A to Phase C
nv18 nvoANVolts 0-1e38V Voltage, Phase A to Neutral
nv19 nvoBNVolts 0-1e38V Voltage, Phase B to Neutral
nv20 nvoCNVolts 0-1e38V Voltage, Phase C to Neutral
nv21 nvoAAmps 0-1e38A Amperage, Phase A
nv22 nvoBAamps 0-1e38A Amperage, Phase B
nv23 nvoCAmps 0-1e38A Amperage, Phase C
nv24 nvoDmdSubInt 0-1e38kW Present Real Subinterval Demand
nv25 nvoCurrDmd 0-1e38kW Current Real Demand
nv26 nvoPeakDmd 0-1e38kW Peak Real Demand
nv27 nvoRDmdSubInt 0-1e38kW Present Reactive Subinterval Demand
nv28 nvoRCurrDmd 0-1e38kW Current Reactive Demand
nv29 nvoRPeakDmd 0-1e38kW Peak Reactive Demand
nv30 nviSubIntLen 0-65535 * Length of Subinterval multiplied by 5 sec.
nv31 nviNumSubInts 0-6 * Number of Subintervals per Demand
nv32 nviCommand 0-65535 * Command Register
nv33 nviMeterIndex 1-63 Selects Modbus address
nv34 nvoMeterIndex 1-63 Reports selected Modbus address
nc49 nciMaxSendT 0.0-6553.4 sec Maximum time between nvoPower updates. Default is 0 sec (disabled).
nc52 nciMinSendT 0.0-6553.4 sec Minimum time between nvoPower updates. Default is 15 sec.
nc88 nciMinDelta 0.0-100.0% Percent change in nvoPower that will force an nvoPower update. Default is 5%. Set to 0.0% to disable.
nc49 nciMaxSendTg 0.0-6553.4 sec Maximum time between updates to all network variables. Default is 0 sec (disabled).
* See H8163-CB documentation for further details. Do not bind to these meter configuration variable, because demand calculation restarts each time the meter writes these variables, and bound
variables are re-written at regular intervals.