Veris Industries MSB SERIES Datasheet User Manual
Wall switch occupancy sensors, Msb series, Lighting c ontr ols

LIGHTING C
ONTR
OLS
VERIS INDUSTRIES
800.354.8556
+1 503.598.4564
www.veris.com
Wall Switch
Occupancy Sensors
SPECIFICATIONS
Standards
UL and cUL Listed; FCC part 15 (Class B) for Home and Office Use
Input
120 or 277VAC±10% 60 Hz
Output
120VAC, 1000W max. tungsten incandescent load; 1000VA max. ballast load; ¼ HP max. motor load; 277VAC; 1800VA max. ballast load
Temperature
0° to 50°C (32° to 122°F)
Humidity
Max. 90% RH noncondensing
*Leadership in Energy and Environmental Design(LEED) is a registered mark of the US Green Building Council
APPLICATIONS
●
Lighting control for LEED* programs and reduced energy usage
●
Use in offices, copy rooms, common building areas, storage closets, small
conference rooms, and more
●
Fits in place of existing wall switches connecting
to the existiting active line and ground wiring...
great for retrofit installations
FEATURES
●
Adjustable time delay
●
Bypass button for “always on” operability...simpilifies commissioning
●
180-degree motion detection
●
Line powered...no separate supply needed
●
Compatible with all magnetic and electronic ballasts...provides ultimate
flexibility
●
No minimum loading requirement
●
Automatic ON/Automatic OFF or manual ON/Automatic OFF versions
●
300 square feet minor motion detection...improves sensor accuracy
●
Decorative faceplate
●
Zero-voltage switching
●
LED indication...provides visual sensor status
●
Single-gang box mount...simplifies installation
DESCRIPTION
The MSB Series employs the latest passive infrared (PIR) technology to automatically
control lighting for areas up to 1000 square feet, achieving energy savings and
convenience.
Each sensor employs a special 180° multi-segmented lens and PIR motion detector
circuit to sense when a person enters the area and automatically activate the lights.
The sensor will automatically switch the lights off after a preset delay if motion is no
longer detected.
The MSB Series fits in place of existing wall switches, connecting to existing active
line and ground wiring, similar to a typical wall switch. The MSB Series is the
simplest way to achieve energy saving lighting control with minimal installation
time.
To assure long relay life, the MSB Series employs a low energy switch circuit to assure
maximum contact life. These sensors are compatible with electronic and magnectic
ballast loads.
Employs A Low-Energy Switch
Circuit To Maximize Contact Life
Year
Warranty
1
Coverage Patterns
MSBP
Top View
35 ft
(10.7m)
10 ft (3.1m)
15 ft (4.6m)
25 ft (7.6m)
35 ft
(10.7m)
Side View
4 ft
(1.2m)
Minor Motion
Major Motion
MSB SERIES
HQ0001802.B 01131