Veris Industries AA36 Install User Manual
Aa36, Notice, Outside air enclosure for the cwe/cwl co

VERIS INDUSTRIES
environmental SenSorS
inStallation GUiDe
Z203809-0C
PAGE 1
©2009 Veris Industries USA 800.354.8556 or +1(0)503.598.4564 / [email protected]
07091
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Outside Air Enclosure for the
CWE/CWL CO
2
Sensors
Installer’s Specifications
Power Requirements
if used in temps below +10°C: 24AC/DC; 1A
if used in temps above +10°C: 0.2A
Temperature Range
-40° to 70°C (-40° to 158°F)
Compatible humid or harsh environments, such as greenhouses, livestock pins, or industrial areas.
AA36
AA36
Dimensions
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classified locations.
• Read and understand the instructions before installing
this product.
• Turn off all power supplying equipment before working on it.
• The installer is responsible for conformance to all applicable codes.
ProDuct iDentification
AA36
quick install
Insert mounting tabs and break off extension piece. Mount to desired locations
1.
using 4 mounting screws.
Mount and wire CWE/CWL sensor (not included).
2.
Install AA36 cover over CWE/CWL.
3.
Red = Power
Blk = COM
Wht = CO2 Out
6.50"
165mm
4.25"
108mm
3.50"
89mm