Veris Industries H280 SERIES Datasheet User Manual
Load status switch, Provides status for manually switched loads, H280 series

current monit
oring
VERIS INDUSTRIES
800.354.8556
+1 503.598.4564
www.veris.com
SPECIFICATIONS
Sensor Power
Line powered
Operating Temperature
-15° to 60°C (5° to 140°F)
Operating Humidity
10-90% RH noncondensing
LED Status
GREEN LED=status normal; RED LED=status alarm
Frequency
50/60 Hz
Wire Specifications:
Lead Length
14” (356 mm) min.
Gauge
UL1015; Neutral: 18 AWG; Line: 12 AWG; Status: 16 AWG
Agency Approvals
UL 508 open device listing
Do not use the LED status indicators as evidence of applied voltage.
DESCRIPTION
The H280 load status switch monitors both voltage and current on manually-
switched loads (e.g., lights/fans in bathrooms). This device provides status
monitoring for loads that are not, or cannot be, controlled by a control system.
The H280 also saves cost by eliminating the need to connect a digital output to
prove status.
APPLICATIONS
●
Lighting
●
Bathroom Fans
●
Sump Pumps
●
Traffic Lights
●
Roadside Lighted Areas (e.g., bus stations)
●
Parking Lots/Garages
FEATURES
●
Wide voltage range (110-277VAC)...easy to use in many applications
●
Low current threshold (100mA) offers great sensitivity for those small loads
●
Nipple mount housing can be connected to any 1/2” conduit knockout for
installation versatility
●
Dual-color LED for easy visual inspection...control system is not required
●
Isolated status output protects control system
Provides Status For
Manually Switched Loads
Load Status Switch
Year
Warranty
5
H280
H280 SERIES
TM
HQ0001773.B 01131