Soft dB Opus Suite Data Logger Module - Manual (Page 8)

7
4 Software Mode
The Data Logger software will run in a different mode depending of the hardware it is running on.
Depending of hardware used, the look and functionalities will be slightly different at launch. The
following table enumerates the differences. Unless otherwise noted, this document relates to the
software used with the Concerto hardware.
Concerto hardware Other hardware: Itrack, Alto-6ch
Panel Size 800x480 pixels 800x600 pixels
Position of the menu bar Bottom of panel Top of panel
Number of inputs managed 4 6
Touch screen functions Yes No
Output generation Embedded generator Embedded generator or wave file
Post-Processing
Limited (Rec Viewer &
Playback)2
Full
2 Post-Processing functions are disabled on the Concerto hardware because the unit is intended for acquisition.
The advanced post-analysis of the acquired data should take place on a PC.