Shogun Motorsports Kawasaki Ninja 250 (08-12) Frame Slider - Manual (Page 3)

5.
Make sure the vehicle is in a fixed secure position. With a standard floor jack
support the engine
enough to remove engine studs. To help prevent scratching of any kind or damage to the bike
when lifting we use a small piece of soft wood or a plastic puck on the jack pad. With jack secure
and in place remove each front and rear stock engine studs.
6.
Loosely mount the left side rail passing the (99-HR-TH3/8-16 x6 11/16-R)9/16 X 160 welded
threaded rodin the rear through the Shogun rail towards the right side of the bike. Use the (99-
HR-TH3/8-16x9 15/16-F) 9/16X 245 welded threaded rod in the front.Pass it through the Shogun
rail towards the right side of the bike. When installing the front rod lightly press down on the
radiator hose so the bolt can pass.
7.
Mount the right side rail using(99-HN-LN9/1618-F&R) 9/16 18 Pitch Hex Flange Serrated Nuts
and torque down to 32ft lbs.