Shogun Motorsports Suzuki GSXR600_750 (06-07) NO CUT Frame Slider - Manual

SUZUKI GSXR600/750 (06-07) NO CUT Frame
Slider Installation Instructions
Part Numbers: 750-5419, 750-5410, 850-5410,
755-5419
Carefully read instructions in their entirety before the install
Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from factory service manual, safety goggles and gloves. The motorcycle
must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time. If in doubt at any point please call us before the install process has begun.
Replacement Parts List: Left Side Components (as if you were sitting on the bike)
QTY
Price each Part Numbers Descriptions
1
$20.00 99-FS-750-5419-L Black Left Side Puck
1 $20.00 99-FS-750-5410-L White Left Side Puck
1 $30.00 99-FS-850-5410-L Polished Billet Left Side Puck
1 $30.00 99-OF-750-5410-L Left Side Offset Black Anodized
1 $3.80 99-SP-750-5410-L2 Left Side Aluminum Washer .845 Outside Diameter X
.155 Thousandths Thick (This larger aluminum washer fits in counter bore between the offset
and the frame on the left side)
1 $2.00 99-HB-SH10150035 Socket Cap 10 X 1.5 X 35 (Holds puck to offset)
2 $3.70 99-SP-750-5410-L&R Aluminum Frame Cup Spacers 1/2 inch Outside
Diameter X 1.25 X 1.0 Inch long. (These spacers are bolted to the back side of the offsets Left
and Right using 99-HB-BH0812520 bolts)
2 $.50 99-HB-0812520 Socket Cap Button Head 8 X 1.25 X 20
1 $3.50 99-HB-SH10125060 Socket Cap 10 X 1.25 X 60 Main Engine Stud
Replacement Parts List: Right Side Components (as if you were sitting on the bike)
1
$20.00 99-FS-750-5419-R Black Right Side Puck
1 $20.00 99-FS-750-5410-R White Right Side Puck
1 $30.00 99-FS-850-5410-R Polished Billet Right Side Puck
1 $30.00 99-OF-750-5410-R Right Side Offset Black Anodized (has two extra cuts
around the center pocket)
1 $2.00 99-HB-SH10150035 Socket Cap 10 X 1.5 X 35 (Holds puck to offset)
2 $3.70 99-SP-750-5410-L&R Aluminum Frame Cup Spacers 1/2 inch Outside
Diameter X 1.25 X 1.0 Inch long. (These spacers are bolted to the back side of the offsets Left
and Right using 99-HB-BH0812520 bolts)
2 $.50 99-HB-0812520 Socket Cap Button Head 8 X 1.25 X 20
1 $3.50 99-HB-SH10125060 Socket Cap 10 X 1.25 X 60 Main Engine Stud