beautypg.com

Shogun Motorsports Kawasaki Ninja 300R DMP Fender Eliminator Instructions User Manual

Shogun Motorsports For motorcycles

background image

Moto911 Inc. - 1062 Calle Negocio, Ste. J, San Clemente, Ca. 92673

– (949)453-9111



Kit Contents

Part Number

Description

Quantity

Part Number

Description

Quantity

99-FE-670-4210

Fender Brackets

2

99-Wash6x12

6x12mm Washer

2

99-Wash6x15

6x15mm Washer

10

99-HB-6x12

6x12 Bolt

2

99-LN-6

6mm Locknut

6

99-HB-6x16

6x16 Bolt

4


Note: To complete your installation we recommend using DMP Marker Lights and DMP OEM Type
Wire Harness, which are available from your local DMP dealer or

www.moto911.com

. Make sure bike

is turned off during installation. It is highly recommended that the DMP fender Eliminator and marker
lights are installed by a certified technician. DMP is not responsible for any part of your motorcycle for
any reason. If in any doubt please call us during installation.

1. Remove rear seat.

2. Remove the two body work bolts located in front of the tail light

3. Remove side bolts

4. Remove body work rivets

Kawasaki Ninja 300R 2013
Fender Eliminator Kit
P/N: 670-4210
MADE IN THE USA!