Shogun Motorsports Kawasaki ZX-10R (2011) NO CUT Frame Slider - Manual

Kawasaki ZX-10R 2011 NO CUT Frame Slider
Installation Instructions
Part Numbers: 755-4949, 750-4949, 750-4940,
710-4949, 850-4940C
MADE IN THE USA!
Carefully read instructions in their entirety before the install
Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from
factory service manual , safety goggles and gloves. The motorcycle
must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time.
Shogun is not responsible for any part of your motorcycle for any reason. Precisely
measure location of cut and if in doubt at any point please call us before the install process has begun.
Replacement Parts List: Left Side Components (as if you were sitting on the bike)
QTY
Price each Part Numbers Descriptions
1
$20.00 99-FS-750-4949-L Black Left Side Puck
1 $20.00 99-FS-750-4940-L White Left Side Puck
1 $3.50 99-HB-SH10125090 Socket Cap 10 X 1.25 X 90 Main Engine Stud
Replacement Parts List: Right Side Components (as if you were sitting on the bike)
1
$20.00 99-FS-750-4949-R Black Right Side Puck
1 $20.00 99-FS-750-4940-R White Right Side Puck
1 $3.50 99-HB-SH10125090 Socket Cap 10 X 1.25 X 90 Main Engine Stud
Frame Sliders: Left frame slider is longer than right.
Installation Steps:
1. Remove right side bolt. Mount right side puck with (99-HB-SH10125090) Socket Cap 10 X 1.25 X
90 Main Engine Stud and torque down.
2. Remove left side bolt. Mount left side puck with (99-HB-SH10125090) Socket Cap 10 X 1.25 X
90 Main Engine Stud and torque down.