Shogun Motorsports Yamaha R6 (06-07) NO CUT Frame Slider - Manual

Yamaha R6 06-07 NO CUT Frame Slider
Installation Instructions
Part Numbers: 750-6329, 755-6329, 750-6320,
850-6320
MADE IN THE USA!
Carefully read instructions in their entirety before the install
Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from factory service manual, safety goggles and gloves. The motorcycle
must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time.
Shogun is not responsible for any part of your motorcycle for any reason. Precisely
measure location of cut and if in doubt at any point please call us before the install process has begun.
Some photos may be used for illustration examples only.
Replacement Parts List: Left Side Components (as if you were sitting on the bike)
QTY
Price each Part Numbers Descriptions
1
$20.00 99-FS-750-6329-L Black Left Side Puck
1 $20.00 99-FS-750-6320-L White Left Side Puck
1 $30.00 99-FS-850-6320-L Polished Billet Left Side Puck
1 $35.00 99-OF-750-6320-L Left Side Offset Black Anodized
1 $2.00 99-HB-SH10150045 Socket Cap 10 X 1.5 X 45 (Holds puck to offset)
1 $3.50 99-HB-SH10125070 Socket Cap 10 X 1.25 X 70 (Goes Though the Offset into
the Frame) Main Engine Stud
Replacement Parts List: Right Side Components (as if you were sitting on the bike)
1
$20.00 99-FS-750-6329-R Black Right Side Puck
1 $20.00 99-FS-750-6320-R White Right Side Puck
1 $30.00 99-FS-850-6320-R Polished Billet Right Side Puck
1 $3.50 99-HB-SH1012 5090 Socket Cap 10 X 1.25 X 90 Main Engine Stud
Frame Sliders: Left longer than right, offset goes on the left side.
Some photos may be used for illustration examples only.
Installation Steps:
1.
Remove right mid panel.
2.
Remove right side engine stud.