beautypg.com

Shogun Motorsports Honda CBR1000RR (04-05) NO CUT Frame Slider User Manual

Shogun Motorsports For motorcycles

background image

Honda CBR1000RR (04-05) NO CUT Frame Slider

Installation Instructions

Part Numbers: 750-3809, 755-3809, 750-3800,

850-3800


MADE IN THE USA!
Carefully read instructions in their entirety before the install

Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from

factory service manual

, safety goggles and gloves. The motorcycle

must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time.

Shogun is not responsible for any part of your motorcycle for any reason.

Precisely

measure location of cut and if in doubt at any point please call us before the install process has begun.

Replacement Parts List: Left Side Components (as if you were sitting on the bike)
QTY

Price each

Part Numbers

Descriptions


1

$20.00

99-FS-750-3809-L&R

Black Left Side Puck

1

$20.00

99-FS-750-3800-L&R

White Left Side Puck

1

$25.00

99-FS-850-3800-L&R

Chrome Left Side Puck

1

$25.00

99-OF-750-3800-L

Left Side Offset Black Anodized (Longer)

1

$2.00

99-HB-SH10150035

Socket Cap 10 X 1.5 X 35 (Holds puck to offset)

1

$5.50

99-HB-SH12125090

Socket Cap 12 X 1.25 X 90 Main Engine Stud


Replacement Parts List: Right Side Components (as if you were sitting on the bike)
1

$20.00

99-FS-750-3809-L&R

Black Left Side Puck

1

$20.00

99-FS-750-3800-L&R

White Left Side Puck

1

$25.00

99-FS-850-3800-L&R

Chrome Left Side Puck

1

$25.00

99-OF-750-3800-R

Right Side Offset Black Anodized

1

$2.00

99-HB-SH10150035

Socket Cap 10 X 1.5 X 35 (Holds puck to offset)

1

$5.50

99-HB-SH12125090

Socket Cap 12 X 1.25 X 90 Main Engine Stud





Frame Sliders: Left and right frame sliders same length.
Offsets: Left offset longer than right. Hang both offsets using a 12mm bolt supplied in the kit. The one
that hangs lower is the left side.

Installation Steps:

1.

Remove left and right body panels.

2.

Remove the left side engine stud. Mount the left side offset using 99-HB-SH12125090 Socket

Cap 12 X 1.25 X 90 Main Engine Stud. Tip: Only tighten enough so you can still move the offset