Shogun Motorsports Kawasaki Ninja 250 (08-12) Frame Slider - Manual

Ninja 250 08-12 Frame Slider Installation
Instructions
Part Numbers: 750-4119, 755-4119, 750-4110,
850-4110
MADE IN THE USA!
Carefully read instructions in their entirety before the install.
Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from
factory service manual , safety goggles and gloves.The motorcycle
must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time without a safe secure support under the engine. Shogun is not responsible for any part
of your motorcycle for any reason. Precisely measure location of cut and if in doubt at any point please
call us before the install process has begun.
Replacement Parts List: Left Side Components (as if you were sitting on the bike)
QTY
Price each Part Numbers Descriptions
1
$20.00 99-FS-750-4119-L Black Left Side Puck
1 $20.00 99-FS-750-4119-L White Left Side Puck
1 $30.00 99-FS-850-4110-L Polished Billet Left Side Puck
1 $60.00 99-OF-750-4110-L Left Side Rail Black Powder Coat
1 $2.50 99-HB-SH10125080 Socket Cap 10 X 1.25 X 80 (Holds puck to offset)
2 $.15 99-HW-M10WASH Washer M10 Zinc Plated
1 $.50 99-LN-LN10125 Hex Lock Nut 10 X 1.25
Replacement Parts List: Right Side Components (as if you were sitting on the bike)
1
$20.00 99-FS-750-4119-R Black Right Side Puck
1 $20.00 99-FS-750-4119-R White Right Side Puck
1 $30.00 99-FS-850-4119-R Polished Billet Right Side Puck
1 $60.00 99-OF-750-4110-R Right Side Rail Black Powder Coat
1 $2.50 99-HB-SH10125080 Socket Cap 10 X 1.25 X 80 (Holds puck to offset)
2 $.15 ea 99-HW-M10WASH Washer M10 Zinc Plated
1 $.50 99-LN-LN10125 Hex Lock Nut 10 X 1.25
Replacement Parts List: Front and Rear Engine Studs (as if you were sitting on the bike)
1
$11.00 99-HR-TH3/8-16 x6 11/16-R 9/16 X 160 Welded Threaded Rod Rear
1 $11.00 99-HR-TH3/8-16x9 15/16-F 9/16 X 245 Welded Threaded Rod Front
2 $.50 ea 99-HN-LN3/8-16 9/16 X 18 Pitch Hex Flange Serrated Nut
Frame Sliders: Left Longer than Right