RBP Chemical Technology J5052 DRYING STIMULATOR - Manual

RBP Chemical Technology, Inc. RBP Chemical Technology, Inc. RBP Chemical Technology, Inc. RBP Chemical Technology, Inc.
150 S. 118 th Street P.O. Box 14069
Milwaukee, WI 53214-0069
www.rbpchemical.com
Corporate: 414-258-0911
Fax: 414-258-7908
RBP East: 508-865-0800
This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.
Product Data Sheet Date: 03/21/12
Supersedes: 08/18/11
PRODUCT #: J5052
DRYING STIMULATOR
Ink Drying Promoter
Description: Specifically designed to promote the drying of conventional sheetfed inks. Extremely
effective in helping conventional sheetfed inks dry better on plastic and polyboard
type stocks.
Directions for Use: Add 1/2 to 1 ounce per gallon of DRYING STIMULATOR to the press ready mix. The
press ready mix should not require more than 3 ounces per gallon to achieve desired
results. The pH will not be influenced by this additive. The conductivity of the
working solution may increase up to 300 micromhos per 1/2 ounce of DRYING
STIMULATOR.
Specifications:
Appearance: Clear purple liquid
Density: 8.9 lbs/gal
VOC Content:
(EPA Method 24)
None
Flash Point: None