RBP Chemical Technology J0159 ROLLER LUBE - Manual

RBP RBP RBP RBP Chemical Technology, Inc. Chemical Technology, Inc. Chemical Technology, Inc. Chemical Technology, Inc.
150 S. 118 th Street P.O. Box 14069
Milwaukee, WI 53214-0069
www.rbpchemical.com
Corporate: 414-258-0911
Fax: 414-258-7908
RBP East: 508-865-0800
This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.
Product Data Sheet Date: 03/21/12
Supersedes: 08/18/11
PRODUCT #: J0159
ROLLER LUBE
Rubber Transfer Roller Lubricator
Description: Roller Lube was specifically formulated to help protect rubber transfer rollers from
damage caused by friction. This product will also reduce ink transfer at the roller
ends when running narrow webs. Roller Lube is safe for use on all rollers used for
heatset and coldest printing. This product has a very low odor, high flashpoint, and is
very low in VOC’s.
Directions for Use: Apply a liberal amount of Roller Lube to exposed portions of rubber transfer rollers.
Do not use on EPDM rollers or in UV ink applications.
Specifications:
Appearance: Clear water white to yellow liquid
Density: 7.0 lbs/gal
VOC Content:
(EPA Method 24)
0.27 lbs/gal, 33 g/L, 3.9 %
Flash Point: > 200°F