beautypg.com

RBP Chemical Technology J3041 SUPER DOT RED DEVELOPER User Manual

Super dot® red developer, Product data sheet, Description

background image

RBP Chemical Technology, Inc.

RBP Chemical Technology, Inc.

RBP Chemical Technology, Inc.

RBP Chemical Technology, Inc.

150 S. 118

th

Street P.O. Box 14069

Milwaukee, WI 53214-0069

www.rbpchemical.com

Corporate: 414-258-0911

Fax: 414-258-7908

RBP East: 508-865-0800

This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.

Product Data Sheet

Date: 08/16/11

Supersedes: 11/02/06

PRODUCT #: J3041

SUPER DOT® RED DEVELOPER

Developer for Additive Plates

Description:

An additive plate developer designed for all types of additive plates. SUPER DOT®
RED DEVELOPER
produces a strong red image area, while cleaning out and
desensitizing the non-image areas for quick clean start-ups. Use in conjunction with
finishers for superior plate performance.

Directions for Use:

By Hand:
Pour a liberal amount of SUPER DOT® RED DEVELOPER onto exposed plate. Work
over entire plate with a moist sponge using a circular motion. Proceed until non-
image areas are free of coating and image is clearly developed. Rinse plate
thoroughly with water and squeegee off. Immediately finish with a plate gum such
as AQUA SEAL, HEADLINE GUM FINISHER or pure GUM ARABIC.
By machine:
Follow manufacturer's recommendations and read label for proper mixing of
developer.

Specifications:

Appearance:

Red emulsion

Density:

9.6 lbs/gal

VOC Content:

(EPA Method 24)

2.6 lbs/gal, 312 g/L, 27.1%

Flash Point:

142 °F