RBP Chemical Technology J9135 EZI CLEAN - Manual

RBP Chemical RBP Chemical RBP Chemical RBP Chemical Technology, Inc. Technology, Inc. Technology, Inc. Technology, Inc.
150 S. 118 th Street P.O. Box 14069
Milwaukee, WI 53214-0069
www.rbpchemical.com
Corporate: 414-258-0911
Fax: 414-258-7908
RBP East: 508-865-0800
This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.
Product Data Sheet Date: 05/16/12
Supersedes: 03/16/12
PRODUCT #: J9135
EZI CLEAN
Pre-Storage Acidic Solvent Emulsion Plate Cleaner
Description: An acidic emulsion plate cleaner and preserver designed to remove unwanted ink
and scum from the plate's image and non-image areas. EZI CLEAN contains solvents,
cleaners, and desensitizers that effectively clean the plate while protecting it from
oxidation. EZI CLEAN is also highly effective for short term plate storage.
Directions for Use: Apply EZI CLEAN directly to the plate or to a dampened sponge or cloth. Wipe across
area that needs to be cleaned. Re-apply for difficult problems. Wipe off excess
chemistry and plate is ready for printing.
Specifications:
Appearance: Creamy white emulsion
Density: 7.7 lbs/gal
VOC Content:
(EPA Method 24)
3.2 lbs/gal, 384 g/L, 42 %
Flash Point: 102 °F