RBP Chemical Technology J5128 UV WASH - Manual

RBP Chemical Technology, Inc. RBP Chemical Technology, Inc. RBP Chemical Technology, Inc. RBP Chemical Technology, Inc.
150 S. 118 th Street P.O. Box 14069
Milwaukee, WI 53214-0069
www.rbpchemical.com
Corporate: 414-258-0911
Fax: 414-258-7908
RBP East: 508-865-0800
This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.
Product Data Sheet Date: 08/22/11
Supersedes: 09/07/10
PRODUCT #: J5128
UV WASH
Fast Drying Press Wash for UV Inks
Description: A highly effective press wash for the removal of UV inks and coatings. A unique blend
of solvents dissolves both oil and water soluble contaminants, allowing for a
complete and thorough clean up of all residual inks, glazes and lint.
Directions for Use: BLANKETS:
Saturate a clean cloth or rag with UV WASH. Wipe evenly across blanket until all ink
and residue are removed. Remove excess.
ROLLER WASH:
Pour a generous amount of UV WASH on rollers while press is running. Allow press
to run while solution works on rollers. Engage wash up blades. When rollers are
clean, press is ready to resume operation.
Specifications:
Appearance: Clear colorless liquid
Density: 7.1 lbs/gal
VOC Content:
(EPA Method 24)
7.1 lbs/gal, 852 g/L, 100%
Flash Point: 54°F