RBP Chemical Technology J5053 METALLIC INK DESENSITIZER User Manual
Metallic ink desensitizer, Product data sheet, Description
RBP Chemical Technology, Inc.
RBP Chemical Technology, Inc.
RBP Chemical Technology, Inc.
RBP Chemical Technology, Inc.
150 S. 118
th
Street P.O. Box 14069
Milwaukee, WI 53214-0069
www.rbpchemical.com
Corporate: 414-258-0911
Fax: 414-258-7908
RBP East: 508-865-0800
This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.
Product Data Sheet
Date: 03/21/12
Supersedes: 08/18/11
PRODUCT #: J5053
METALLIC INK DESENSITIZER
Metallic Ink Desensitizer
Description:
Designed to help keep non-image areas free of sensitivity when running metallic
inks. Cleaner non-image areas assist in reducing the water settings and maintaining
good ink/water balance.
Directions for Use:
Add 1/2 to 1 ounce per gallon of METALLIC INK DESENSITIZER to the press ready
mix. METALLIC INK DESENSITIZER will not influence pH, but will increase the
conductivity of the working solution.
Specifications:
Appearance:
Clear white liquid
Density:
9.9 lbs/gal
VOC Content:
(EPA Method 24)
None
Flash Point:
None