QNAP Security VioStor CMS (Version: 1.0.1) - Manual (Page 56)

56
3.8.3 Adding/Removing Camera
Select an NVR from the list and a list of available cameras will be shown below. Use the left
and right arrows to add or remove the cameras to be controlled and monitored by the CMS
Client. After applying the settings, the number of cameras connected to the NVR will appear
next to the NVR name on the left list.
3.8.4 Firmware Update
Follow the steps below to update firmware:
1. Select the NVR for which to update the firmware and click “Update Firmware”.