QNAP Security VioStor CMS (Version: 1.0.1) User Manual
Page 113
113
When an alarm is triggered by a camera and the CMS will enter the alert mode. There are
two kinds of alert presentations in the alert mode: 1) if the live view is displayed on the
Monitoring Window, the alarm button on the top right corner of the screen will start to flash.
When this happens, users can click this alarm button to view the system logs; and 2) if the
E-map is displayed on the Monitoring Window, the camera icon will change to
. Users can
choose to handle the alarm by moving the mouse cursor to the event logs at bottom of the
screen (please refer to Chapter
Note: Users can press F11 to turn the full screen mode on or off.
Camera alarm icon
Camera alarm
information
Switch to the alert mode
(alarm events triggered)
Event log