QNAP Security VioStor CMS (Version: 1.0.1) - Manual (Page 163)

163
IPv6 Auto Configuration
If an IPv6 enabled router is available on the network, select this option to allow the CMS
Server to acquire the IPv6 address and the configurations automatically.
Use static IP address
To use a static IP address, enter the IP address (e.g. 2001:bc95:1234:5678), prefix length
(e.g. 64), and the gateway address for the CMS. You may contact your ISP for the
information of the prefix and the prefix length.
 Enable Router Advertisement Daemon (radvd)
To configure the CMS Server as an IPv6 host and distribute IPv6 addresses to the local
clients which support IPv6, enable this option and enter the prefix and prefix length.
IPv6 DNS server
Enter the preferred DNS server in the upper field and the alternate DNS server in the lower
field. Contact the ISP or network administrator for the information. If IPv6 auto
configuration is selected, leave the fields as “::”.