EVS IPDirector Version 4.3 - October 2007 Part 1 User's Manual - Manual (Page 62)

IP Director Version 4.3 – User Manual – Part 1: Introduction
EVS Broadcast Equipment
Issue 4.3.C
3.4.8 H
OW TO
A
SSOCIATE
C
HANNELS TO
P
ROVIDE A
PGM/PRV M
ODE
At least 2 player channels must be available to run this
configuration. To initialize this mode, use the standard command
of SHIFT + click or CTRL + click to select the channels required,
then use right-click to see the contextual menu, and select the
PGM/PRV command from the menu.
For each XT server it is only possible to make a PGM/PRV pair
of channels from PGM1/PGM2 or from PGM3/PGM4 of the
server. PGM1 or PGM3 are always the PGM channels and PGM2
or PGM4 will always be the PRV channels. This mode allows the
operator to play several clips ‘back to back’ with transition
effects.
When playing single clips, the next clip can be selected on the
PRV channel and a TAKE button is present and active on the
designated PGM control panel in this mode to allow the clip
selected on PRV to be transitioned to manually.
When running a play-list this mode provides the PRV channel
necessary for using transitions.
Please refer to the section on PGM-PRV settings in the Control
Panel Chapter for a detailed description of the settings available
for this mode.
51