EVS IPDirector Version 4.3 - October 2007 Part 1 User's Manual - Manual (Page 49)

Issue 4.3.C IP Director Version 4.3 – User Manual – Part 1: Introduction
EVS Broadcast Equipment
2.7.5 H
OW TO
M
ODIFY THE
D
EFAULT
V
ALUES OF A
P
ROFILE
When a metadata profile is imported into IP Director, the default
values specified in the .xml file are imported. It is possible to
modify the default values of a profile.
To modify the default values of a profile, proceed as follows
1. In the main IP Director window, select the menu Metadata
> Edit Current Default Metadata.
The Edit Current Profile and Default Values window
opens:
2. In the Clip Profile field, select the profile to be managed.
All the fields of the profile are displayed below the Clip
Profile field.
3. Select or enter the desired default values in the profile
fields.
4. Click OK.
The new specified values will now be used as default values for
the new created clips.
38