EVS IPDirector Version 4.3 - October 2007 Part 1 User's Manual - Manual (Page 28)

IP Director Version 4.3 – User Manual – Part 1: Introduction
EVS Broadcast Equipment
Issue 4.3.C
• clip creation
• take effect
• play-list
o
default transition
o
predefined values for audio swap and effect duration
• GPI and Auxiliary track
Some tabs contain a short description of the settings. However,
you can refer to the sections specified below for more
information on the settings in a tab.
General Settings
The general settings apply to the whole IP Director system.
Display XT Structure
The Display XT Structure setting makes it possible to display the
XT structure in different ways in the various applications where it
is available, e.g. in the Database Explorer, in the contextual
menu of the Control Panel.
Three possible displays are available:
Display option Description
Do not display All elements are listed without
displaying the XT structure or the page
and bank organisation.
Display XTs but not
Page/Bank All elements are listed on the level
down the XT they belong to.
Display XTs, Page
and Bank All elements are listed on the level
down of the page/bank they belong to.
Language
The language setting makes it possible to change the interface
language to the selected language. This is not fully available on
this version.
Key Default Output
The Key Default Output buttons make it possible to define the
forced key channel colour when the user loads a Fill clip that is
not associated with a Key clip:
• A black key channel will be forced if the Black option is
selected.
17