EVS IPDirector Version 4.3 - October 2007 Part 1 User's Manual - Manual (Page 60)

IP Director Version 4.3 – User Manual – Part 1: Introduction
EVS Broadcast Equipment
Issue 4.3.C
3.4.4 H
OW TO
L
OCK A
C
HANNEL
By right-clicking on a channel, a contextual menu appears. If
lock is selected the channel will be locked from use by other
users.
If the symbol appears the channel has been locked by the
workstation being operated.
If the Symbol appears in red then another workstation has
locked its use
3.4.5 H
OW TO
U
NLOCK A
C
HANNEL
If a channel has been locked on the local workstation, right-
clicking on a channel, shows a contextual menu. If Unlock is
selected the channel will be unlocked.
If a channel has been locked on another workstation right-
clicking on a channel, shows a contextual menu. If Unlock is
selected a confirmation message has to be answered to unlock
the channel.
3.4.6 H
OW TO
G
ANG THE
P
LAYBACK OF
C
HANNELS
To gang 2 or more channels together, use the standard
command of shift + click or ctrl + click to select the channels
required, then use right-click to see the contextual menu, and
select the gang command from the menu.
The ganged channels will now have a next to them to
signify their new status.
To add further channels to a group select all channels of the
group and the new channel required and then press gang again.
It is not possible to gang record and play channels together. It is
also not possible to gang channels of different groups.
49