EVS IPDirector Version 4.3 - October 2007 Part 1 User's Manual - Manual (Page 50)

IP Director Version 4.3 – User Manual – Part 1: Introduction
EVS Broadcast Equipment
Issue 4.3.C
2.7.6 H
OW TO
R
ESET THE
D
EFAULT
V
ALUES IN A
P
ROFILE
If you have modified the default values of a metadata profile in
IP Director, you can reset the initial default values at any time,
as they were defined when the .xml file was imported.
To reset the default values of a profile, proceed as follows
1. In the main IP Director window, select the menu Metadata
> Edit Current Default Metadata.
The Edit Current Profile and Default Values window
opens:
2. In the Clip Profile field, select the profile to be managed.
All the fields of the profile are displayed below the Clip
Profile field.
3. Select the Reset Default Values button on the bottom left
part of the window.
4. Click OK.
The default values have been reset to the initial ones.
39