EVS XSense Version 10.03 - July 2010 Configuration Manual - Manual (Page 45)

Issue
10.03.A XSense – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
38
2.12 MULTIVIEWER SETTINGS (PAGE 10)
The Page 10 of the Setup Configuration module makes it possible to specify the
settings for a multiviewer connected to the server.
2.12.1 I
NTRODUCTION
When an optional multiviewer board is installed on the server, you can monitor the
server channels on a multiviewer.
The server is connected to the display device via one of the dedicated connectors
on the server backplane:
• HD SDI connector
• SD SDI connector
• DB15 configurable connector.
When the multiviewer board is installed, Multicam automatically detects it. This
means the multiviewer feature is directly available and the user can specify the
multiviewer settings. Otherwise, the message !Not Detected! is displayed
on the first line of Page 10.
2.12.2 S
ETTINGS
As usual in the SHIFT-F2 screens, you move from one field to the over with the
key and you change the value of a field by means of the arrow keys.
D
ISPLAY
S
ETTINGS
Multiviewer Composition
The number of recorder or player channels to be displayed and the multiviewer
composition are defined in the field below: