EVS IPDirector Version 5.8 - July 2010 Part 5 User's Manual - Manual (Page 68)

IPDirector Version 5.8– User Manual – Part 5: Playout – Player Control Panel
EVS Broadcast Equipment – July 2010
Issue 5.8.B
59
1.5.3 H
OW TO
S
HIFT TO THE
S
AME
T
IMECODE ON
A
NOTHER
R
ECORDER
When you want to shift to another recorder and position yourself on the same
timecode as the loaded record train, proceed as follows:
1. Click on the Pause button to freeze the record train loaded.
2. Right-chick on the Pause button to open the contextual menu.
3. Choose the recorder you want to display on the same EVS video server or
on another server.
The visual display shifts to the selected recorder at the same timecode position as
the first recorder.
1.6 CREATING MEDIA
1.6.1 H
OW TO
C
REATE
C
LIPS IN THE
C
ONTROL
P
ANEL
To be able to create clips in the Control Panel, you need to ensure that:
• You have assigned a channel or the Software Player to the Control Panel
See section 1.3 ‘Assigning a Channel or the Software Player’ on page 51.
• You have loaded the record train or the clip from which you want to create a
new clip.
See section 1.4 ‘Loading Media’, on page 53.
Note
Before creating clips on which you want to apply metadata, ensure that
the relevant profile is defined as the current profile.
To create a clip in the Control Panel module, proceed as follows:
1. Load the record train, the clip or the growing clip from which you want to
create a new clip
2. Create an IN point with one of the following actions:
• Place the position indicator on the jog bar where you want to create the
IN point and select the Mark IN button .
• Enter the timecode of the requested IN point in the IN field and press
ENTER.
The IN point is set: