Clip-list element contextual menu, Cut/copy/paste an element, Remove element / remove all elements – EVS IPDirector Version 5.8 - July 2010 Part 5 User's Manual User Manual
Page 55

Issue 5.8.B
IPDirector Version 5.8 – User Manual – Part 5: Playout – Player Control Panel
EVS Broadcast Equipment – July 2010
46
C
LIP
-L
IST
E
LEMENT
C
ONTEXTUAL
M
ENU
The commands in the contextual menu available when right-clicking on an element
of the playlist are described in the following sections
Cut/Copy/Paste an Element
The operator can cut, copy and paste one or several elements within the list in the
following ways:
•
using the Windows shortcut keys (CTRL+X, CTRL+C and CTRL+V)
•
right-clicking in the element list to open the contextual menu when the required
elements have been selected.
Then:
•
a Cut and Paste operation will move the selected elements.
•
a Copy and Paste operation will copy the selected elements.
The elements are inserted in the playlist before or after the element selected when
the Paste operation is initiated. This depends on the Insert Mode in Playlist
parameter of the Playlist settings. See the Tools > Settings > Playlist >
Playlist/General category.
Remove Element / Remove All Elements
To remove one or more selected elements from the playlist, select Remove
selected element(s) from the contextual menu.
To remove all selected elements from the playlist, select Remove All Elements
from the contextual menu.
A warning message will be displayed, requesting the user to confirm the action:
Note
If a group is part of the selection, all elements of the group will be
removed.