EVS XEDIO Manager Version 3.1 - January 2011 User Manual - Manual (Page 18)

Xedio Suite Version 3.1 - User Manual – Xedio Manager
EVS Broadcast Equipment – January 2011
Issue 3.1.C
9
3.2.2 C
REATING
P
HYSICAL
E
NCODER
To create and configure a physical encoder, complete the following fields and then
click on the Create button.
The encoder name is added to the list on the left side of the window and ‘Channel
1’ appears underneath. As the XEDIO I/O model is a multichannel encoder, up to 2
channel numbers are displayed under the encoder name.
Field Description
Encoder Model Select an encoder model among CDM[1] (also called
CDM-MPEG), CDM[2], XEDIO I/O (also called CDM[3]
PCX3)
Encoder Description Automatically filled at encoder model selection.
Company Automatically filled at encoder model selection.
Number of Channels Automatically filled at encoder model selection.
Type Automatically filled at encoder model selection.
Label Name you give to the physical encoder, as it will appear
in the list. Preferably choose a name relevant to the job
of the encoder or to its position in the Xedio architecture.
IP Address IP address of the physical encoder.
Description Optional text to describe the encoder. This will appear in
a ToolTip when placing the pointer over the
corresponding encoder name in the list on the left.