EVS GX Version 1.00 - February 2011 User’s Manual - Manual (Page 63)

GX server – Version 1.0 – User’s Manual
EVS Broadcast Equipment – February 2011
Issue 1.0.C
57
5.5.9 GX C
LIP
D
URATION AND
T
IMECODES
P
URPOSE
Based on an example, this section explains how:
• The protocol duration is calculated
• The timecodes of the GX clip are displayed, compared to the timecode of the
raw materials.
E
XAMPLE
In the example, the following settings have been defined:
• The video raw material is 2 seconds. The audio raw material is 3 seconds
• The GX clip starts at TC 00:00:00:10 of the video and audio raw material (IN
field = 00:00:00:10).
• The GX clip stops at TC 00:00:01:20 of the corresponding video raw material
(OUT field = 00:00:01:20).
• A loop is defined on the video track from the loop point 00:00:01:10 to the
video OUT point of the GX clip. The loop should be played 4 times.