EVS GX Version 1.00 - February 2011 User’s Manual - Manual (Page 40)

Issue 1.0.C GX server – Version 1.0 – User’s Manual
EVS Broadcast Equipment – February 2011
34
5.3.7 F
IELDS IN THE
R
AW
M
ATERIALS
T
AB
The Raw Materials tab provides the following information on the material available
on the Raw Materials drive. The field values are not editable.
Field Name Description Values
Name Name of the audio file or the
graphic file sequence.
A graphic file sequence follows the
pattern: [name][first file
n u m b e r ] … [ l a s t f i l e
n u m b e r ] . [ e x t e n s i o n ]
An audio file follows the usual
pattern: [name].[extension]
File Count Number of files in the file
sequence.
The value will be ‘1’ for audio files.
Type Type of the file. The values can currently be ‘Audio’
, or ‘Fill & Key’ .
Video
Standard
Video standard used in the
graphic file sequence. Not
applicable to audio files.
When a video standard can
have two different field
rates, you can select
another field rate than the
default one.
The value for video sequences can
be one of these:
• SD PAL
• SD NTSC DF or NDF
• 1080i 50Hz
• 1080i 59.94Hz DF or NDF
• 720p 50Hz
• 720p 59.94Hz DF or NDF
Size Size the audio or video file
on the Raw Materials drive.
The value is expressed in Mb or GB.
Import
Date
Date (defined on the GX
server) where the audio or
video file was imported
The import date is the date when the
material was imported to the Raw
Materials drive.
Progress Progress bar to show the
progress of the copy to the
Raw Materials drive
The progress bar displays:
• The percentage of the file that
has already copied during the
import process
• ‘Completed’ once the import
process is finished.
• ‘None’ when the file has not been
imported last.
• ‘Error’ when there has been an
error in the import process. The
tooltip provides information on
the given error.