AASTRA 6755i User Guide EN - Manual (Page 81)

Line Keys, Programmable Keys, and Softkeys
41-001386-00 REV01 – 06.2013
74
Configuring a BLF/List Key
The BLF List function can be configured on the 6755i using the Aastra Web UI only.
If you set a key to use BLF/List, you must also enter a BLF List URI at Operation->Softkeys and XML->Services. The BLF
List URI is the name of the BLF list defined on the BroadSoft BroadWorks Busy Lamp field page for your particular user. For
example, sip:[email protected]. The value of the BLF/List URI parameter must match the list name configured. Otherwise,
no values display on the 6755i screen and the feature is disabled.
Use the following procedure to set a key to function as "BLF/List". The procedure shows the softkey screens as an example.
Aastra Web UI
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module .
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select "BLF/List" (BroadSoft BroadWorks).