AASTRA 6755i User Guide EN - Manual (Page 180)

Additional Features
173
41-001386-00 REV01 – 06.2013
Status Scroll Delay
Using the Aastra Web UI, you can specify a scroll delay option that allows you to set the time delay, in seconds, between
the scrolling of each status message on the phone. You can specify this setting in the "Status Scroll Delay (seconds)"
field at the path Basic Settings->Preferences->General. The default time is 5 seconds for each message to display before
scrolling to the next message. You can increase or decrease this time as required. Setting and saving the value in the Aas-
tra Web UI applies to the phone immediately.
Configuring Status Scroll Delay
Use the following procedures to specify a status scroll delay on the IP phone.
Aastra Web UI
1. Click on Basic Settings->Preferences->General.
2. Enter a value in the "Status Scroll Delay (seconds)" field. Valid values are: 1 to 25 seconds. Default is 5 seconds.
3. Click Save Settings to save our changes.