AASTRA DT692 Cordless for MXONE Quick Reference Guide EN - Manual (Page 70)

1424-EN/LZT 103 090 Uen D 2010-02-12 70
C ALL F ORWARDING
Note: Some of the predefined messages need to be completed with
time or date information. If you are not in the office for a certain
period of time (for example meeting, vacation, lunch, illness), you
can specify the time or date when you will be back.
12.3.1 Defining Call Forward on Absence
To define call forwarding on absence on your extension, from your idle
extension do the following:
1. Press 61*#.
2. Enter the desired Mini-Message code.
If required, enter information about return time or date, or enter a
phone number.
3. Press *.
4. Press .
Wait for the service acceptance tone.
5. Press to finish the procedure.
• Internal callers will receive the absence information as text on
their phone display. (If the phone does not have a display, the
caller will receive the information as a recorded message.)
• External callers will be routed to the operator, who also has
access to your absent information.
An internal party that attempts to contact you from an extension with the
capacity to receive mini-messages will immediately receive your
absence message. This may also be the case for an external ISDN party
that is compatible with the mini-messaging service, provided the
following requirements are met:
4 ABSENT UNTIL MM-DD (month-day)
5 IN CASE OF EMERGENCY CALL NNNN (phone number)
6 PLEASE CALL BACK IN A FEW
MINUTES
8 BUSY - RETURN TIME HH:MM (hour:minute)
9 ABSENT - RETURN DATE MM-DD (month-day)
Code Pre-defined Text
Completing
Information