AASTRA 6737i User Guide EN - Manual (Page 63)

Line Keys and Softkeys
41-001452-00 Rev 01 – 06.2013
56
In the Aastra Web UI, the operational states for each softkey display enabled. To disable a state, you uncheck the box for
that state.
Key Display Behavior
On the 6737i IP Phone, you can configure up to 20 functions on the bottom softkeys. If you have no softkeys configured on
the IP Phone, and you assign softkey functions to higher number keys in the Aastra Web UI, the key functions automati-
cally appear in the first available position on the LCD display.
For example, if softkeys 1 through 20 are set to "None", and you set softkey 12 as the following:
Type: speeddial
Label: LAB
Value: 3456
after saving the settings, the "LAB" label actually appears in position 1 of the LCD.
A softkey function of "None" does not display on the idle screen at all.
Call Forward idle, connected, incoming, outgoing, busy
BLF/Xfer idle, connected, incoming, outgoing, busy
Speeddial/Xfer idle, connected, incoming, outgoing, busy
Speeddial/Conf idle, connected, incoming, outgoing, busy
Directory idle, connected, incoming, outgoing, busy
Callers List idle, connected, incoming, outgoing, busy
Intercom idle, connected, incoming, outgoing, busy
Services idle, connected, incoming, outgoing, busy
Phone Lock All states disabled.
Paging All states disabled.
Empty idle, connected, incoming, outgoing, busy
Softkey Type Default States