AASTRA 6737i User Guide EN - Manual (Page 100)

Line Keys and Softkeys
93
41-001452-00 Rev 01 – 06.2013
BLF/Xfer
The BLF key allows one or more extensions to be monitored, and once there is any state change with those extensions,
the key shows the status of the monitored lines. The Xfer key allows a call to be transferred to other recipients blindly or
consultatively. The BLF/Xfer key combines the BLF and Xfer key's functionality together allowing the user to transfer calls
or use BLF with one key.
BLF/Xfer Key Requirements and Functionality
• BLF/Xfer and BLF
A BLF/Xfer key can be configured for subscribing to an extension and monitor the status of the extension, similar to
the BLF key functionality. Changes of the state of the monitored extension are indicated by a LED / Icon.
• BLF/Xfer and Blind Transfer Calls
When the focused line is in the “Connected” state, pressing the BLF/Xfer key transfers the call to the extension uncon-
ditionally, disregarding the status of the monitored extension.
• If transferring a call to an extension fails, a message “Transfer Failed” displays on the phone, and you can reconnect
the call (get the call back) by pressing the line key again.
• BLF/Xfer and Call Forward
When the focused line is in the “Ringing” state, pressing the BLF/Xfer key forwards the call to the extension uncondi-
tionally, disregarding the status of the monitored extension.
• BLF/Xfer and Speed Dial
When the focused line and the monitored extension are idle, pressing the BLF/Xfer key causes the phone to go off-
hook and dial the number of the extension.
Expansion Module Keys
5. Select from “Key 1” through “Key 36” (M670i)
or
Select from “Key 1” through “Key 60” (M675i)
6. In the "Type" field, select Call Forward.
7. Click Save Settings.
Note:
It is recommended that you enable the “Switch UI Focus to Ringing Line” parameter when using the BLF/Xfer feature.
For more information about this parameter, see
“Preferred Line and Preferred Line Timeout” on page 172 .