Garmin GPS 90 - Manual (Page 70)

Once the simulator mode has been activated, use the
Position or Navigation Page to set your speed and track.
You may also enter a new position if you desire (only
from the Position Page).
To enter track, speed and position:
1. Highlight the ‘track’ field and press the E key.
2. Enter a track heading and press E .
3. Highlight the ‘speed’ field and press E .
4. Enter a speed and press E .
5. Highlight the ‘position’ field and press E .
6. Enter a position and press the E key.
The GPS 90 does not track satellites in simulator mode.
Although you can create and save waypoints and routes
while using the simulator mode, never attempt to use the
simulator mode for actual navigation. The GPS 90 will
always power up in the last selected satellite mode.
62
Main Menu
Page
Simulator Mode
Entering track and
speed from the
Position page.
⌃
gps 90 manual 8/6/98 10:01 AM Page 62